Hi,
Ask a help. What I have: a cluster with 10 hosts (Win2012R2) with Standard Switch (trunk from physical switch --> team of two NICs) on each host, divided into logical adapters: Management, Live Migration, Heartbeat and one VLAN shares between VM by hands
on each VM's adaper by VLAN setting. Team was balanced by Hyper-V Port. On virtual switch was enabled QoS and network metric (Heartbeat, Live Migration and Management). VMs are placed in CSV which connected by fiber to each host.
Now I have to add cluster to VMM 2012R2. What I've already done: added cluster to VMM. All works fine. Got one host for tests but left it on the cluster. For this host I created logical network with lan and sites. Added IP Pools for heartbeat and Live Migration networks. Added VLAN for VMs. Created Port with team and dynamic balance. Created Logical Switch. After created VM network. Then I tried to add this network to existed VMs and their adapers didn't find any VM networks. If I add a new VM by VMM it get all list of VM networks but not old VMs: list is empty.
Questions:
1. If cluster with existed VMs is added to VMM, is it possible to force to see VM network by existed VMs?
2. Is it possible to set QoS and metric for subnets on hosts by VMM? Or it's possible by PoSH on each host?
3. Is it possible to use QoS by Dynamic balance on team?
Thanks!