So i have not been able to find the solution for this one yet and hope that someone else may have an idea.
I installed RTM VMM 2016 then created a nano build with Compute, Storage, Clustering, OEM Drivers then the 2 SCVMM packages.
I am able to deploy out the servers just fine.
For networking i created Logical switch using Embedded teaming as i could not get a normal switch to team. If you try to use a normal switch with LBFO teaming you will get
Error (25179)
Creating a Virtual Switch based on logical switch is not supported on the selected host ....
So now i have a working host with logical networks and switch and all seems good. But if you look in the compliance view for the switch it is showing out of compliance. So it seems that Nano loads an extra switch extension that is not listed in VMM.
Nano seems to have the following virtual switch extensions:
Microsoft Windows Filtering Platform
Microsoft NDIS Capture
Microsoft Azure VFP Switch Extension
The issue is that that VMM dosnt have the Asure VFP switch extension and without installing a network controller which i dont need i dont see any way to add that in to VMM. Even if it is un-selected in the Virtual Switch manager the fact that it is there VMM wants to remove it.
When you go in to VMM and find the virtual switch change to hosts view and click on one of the hosts you get the following warning:
Warning (26846)
Either the switch extension 'Microsoft Windows Filtering Platform' with driver ID 'e7c3b2f0-f3c5-48df-af2b-10fed6d72e7a' was not installed on the host, or VMM was unable to enumerate the extension's driver version and driver ID. The switch extension is required
for this virtual switch.
Recommended Action
Remediate the compliance of this virtual switch, or install the updated switch extension directly on the host.
When you run the Remediate no change happens.